3D three-dimensional gold oil

Shoes 3D stereoscopic mainly applied to the oil mesh . Leather space . Thick upper printing plate material of high elastic nylon fabric, mirror leather, microfiber leather, waterproof nylon fabric backing or the like using a transparent printing effect; characterized by easy to use, excellent adhesion, soft texture, good flexibility, cold resistance to bending ( -2 0 deg.] C - -3 0 deg.] C bent 120,000 times) , acid resistance, ultraviolet ray resistance, non-yellowing. The product meets environmental protection standards, has excellent freezing resistance, does not contain formaldehyde, does not contain APEO , and can be used for children's clothing printing.

Appearance: milky white paste

Composition: polyurethane and additives

P H ：7.5~8.5

Self-drying ( 96 hours)

Printing      drying ( 2 scratch printing at the bottom )  →  Thick printing                      　　

Baking ( 80 ℃× 8 hours)

1.   Since the 3D three-dimensional gold oil is matched with a special cross-linking agent, the customer cannot change or increase or decrease the cross-linking agent at will.

2.   Generally speaking, 3% curing agent is enough; if special tests are required, the amount of curing agent should be increased as appropriate. The printing paste with curing agent must be used up within 4 hours, otherwise the consequences will be caused. ,  The company is not responsible.

3.   After printing, the printed surface must be fully heat-treated (baked) to fully display its excellent printing effect. If it is dried naturally, the fastness can be tested only after 96 hours.

4.   The storage period of this product is 12 months. Please keep it in a low-temperature and dry place. The lid must be tightly closed after use to avoid skin formation on the surface, which may affect reuse. Cover the bottle cap after using the matching curing agent, and do not open it in the air!

Due to the variability of chemical products, whether the company provides small samples or bulk goods, the factory needs to make samples carefully according to the specified process conditions, and can be put into mass production after the various fastness tests are qualified. The company will not bear any loss caused by untested.