196 machine printing glue

196/196A   machine printed white glue / transparent glue

196/196 machine printing glue is suitable for glue printing on flat screen machines, elliptical machines, and octopus machines. It has the characteristics of good operability and good screen passability. It can be printed continuously for more than 4 hours and can be used for cotton, linen, T /C and other fabric glue printing. Its characteristics are easy to use, soft to the touch, good printing operability, and excellent fastness. The product complies with environmental protection standards, does not contain formaldehyde, APEO , plasticizer, heavy metals, etc., and can be used for children's clothing printing.

Appearance: white paste

Composition: Acrylate polymer, additives

P H ：7.5～8.5

Water-based sharp knife for 100-120 mesh screen --- ( 2 knives for printing --- flash dry) X3 times --- baking ( 130 ～ 150 ℃× 1 ～ 2 minutes)

1.   Adding curing agent L-300 1% can effectively improve the firmness of the printed surface to meet special fabrics or high-demand printing. The printing paste with curing agent must be used up within 24 hours; for high-elastic stretch fabrics , The printing of rib cloth can be printed 1-2 times with transparent paste 196A to improve printing flexibility.

2.   After printing, the printed surface must be fully heat-treated (baked) to fully display its excellent printing effect. If it is dried naturally, the fastness can be tested only after 72 hours.

3.   The storage period of this product is 12 months. Please keep it in a low temperature and dry place. The lid must be tightly closed after use to avoid skin formation on the surface, which may affect reuse.

4.   Due to the variability of chemical products, whether the company provides small samples or bulk goods, the factory needs to make careful samples according to the specified process conditions, and can be put into mass production only after the various fastness tests are qualified. The company will not bear any loss caused by untested.